The 6 32 screw is the screws with #6 that is 0.1380 \ 3.5052 external thread diameter and a uniform diameter the entire length of the shaft as opposed to tapered screws which have a pointed tip. They are used to fasten machine components, appliances, and more. Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers. Ever Hardware provides the custom-made 6 32 screw and customizable packaging.
Tool size | Fastener size |
0 | 0–1 |
1 | 2–4 |
2 | 5–9 |
3 | 10–16 |
4 | 18–24 |
Unified Coarse (UNC), commonly referred to as National Coarse (NC) in retailing. The Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly used in the United States and Canada. It is the main standard for bolts, nuts, and a wide variety of other threaded fasteners used in these countries. It has the same 60° profile as the ISO metric screw thread, but the characteristic dimensions of each UTS thread (outer diameter and pitch) were chosen as an inch fraction rather than a millimeter value. The UTS is currently controlled by ASME/ANSI in the United States. The standard designation for a UTS thread is a number indicating the nominal (major) diameter of the thread, followed by the pitch measured in threads per inch. For diameters smaller than 1?4 inch, the diameter is indicated by an integer number defined in the standard; for all other diameters, the inch figure is given.
Ever Hardware makes the world a better place
Category | 6 32 Screw |
---|---|
Finish | Electro-Plating |
Thread type | Metric/Imperial/According to Request |
Material | Stainless Steel/Carbon Steel/Aluminum/Brass/Copper, etc. |
Brand | Ever Hardware |
Place of origin | China Mainland |
Size | Customized as required |
Amazing Product: Get It Now!
This is where your amazing product custom-made from!
How To Place An Order
What Client’s Say
Those look great! All the specs look perfect.
Perfect ! This is that I need.
Thank you very much.
The bolts are perfect and they’re fits good.
The nut fits perfect on our M2.5 screw part.
Height is also ok.
I tested the bolts this morning and they are perfect. Thank you so much.
We are professional on precision 6 32 screw and custom-made fasteners services!
This is where your amazing product design can go so your clients can feel all about the features and see how awesome it is!