Most cases use threaded jack screws (motherboard standoff) for attaching the motherboard to the case chassis. Sometimes threaded or snap-lock plastic standoffs are used, which are less secure, but equally useful in a stationary computer. The standoff provides a margin of space between the motherboard and the case to keep the multiple solder points below from grounding and short-circuiting. Usually, the standoff has a #6-32 UNC male thread on one end which screws into a threaded hole in the case or motherboard backplate, and a #6-32 UNC female thread in the other end which accepts a screw to retain the motherboard. Less often, the standoff has a female thread in both ends and a second screw is used to attach it to the case. Some standoffs use the M3 female thread (which faces the motherboard) instead of #6-32 UNC, and on a rare occasion, a mixture of types can be used in the same case. Version 2.1 of the ATX specification states that the length of standoffs needs to be at least 0.25 inches (6.4 mm), with their cross sections fitting within 0.40 by 0.40 inches (10 mm × 10 mm) square areas centered around each mounting hole on ATX motherboards. Ever Hardware provides custom-made fasteners and customizable packaging.
A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics, they are frequently used to raise a printed-circuit board above a surface. Insulating standoffs keep two parts from touching each other, thereby preventing electrical shorts. When used to fasten cable connectors (i.e. “D” connectors) together, they are called “jack screws”.
Ever Hardware makes the world a better place
Category | Jack Screws |
---|---|
Finish | Electro-Plating |
Thread type | Metric/Imperial/According to Request |
Material | Stainless Steel/Carbon Steel/Aluminum/Brass/Copper, etc. |
Brand | Ever Hardware |
Place of origin | China Mainland |
Size | Customized as required |
Amazing Product: Get It Now!
This is where your amazing product custom-made from!
How To Place An Order
What Client’s Say
Those look great! All the specs look perfect.
Perfect ! This is that I need.
Thank you very much.
The bolts are perfect and they’re fits good.
The nut fits perfect on our M2.5 screw part.
Height is also ok.
I tested the bolts this morning and they are perfect. Thank you so much.
We are professional on precision jack screws and custom-made fasteners services!
This is where your amazing product design can go so your clients can feel all about the features and see how awesome it is!