Nut Bolt Washer Custom Colored Skateboard Metal Fasteners Manufacturer

The nut bolt washer is forming fasteners. A fastener is a hardware device that mechanically joins or affixes two or more objects together.
Fasteners can also be used to close a container such as a bag, a box, or an envelope; or they may involve keeping together the sides of an opening of flexible material, attaching a lid to a container, etc. There are also special-purpose closing devices, e.g. a bread clip. Fasteners used in these manners are often temporary, in that they may be fastened and unfastened repeatedly. Ever Hardware provides custom-made fasteners and customizable packaging.

A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads’ friction, a slight stretching of the bolt, and compression of the parts to be held together.

A bolt is a form of threaded fastener with an external male thread. Bolts are thus closely related to, and often confused with, screws.
The distinction between a bolt and a screw is unclear and commonly misunderstood. There are several practical differences, but most have some degree of overlap between bolts and screws.
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID).

Ever Hardware makes the world a better place