Stainless Steel Deck Screws Custom Wood Cutting Point Deck Fastener

The stainless steel deck screws come in a wide variety of lengths and widths, called shanks. They also use different shapes of the driver, the part on the screw head that allows a screwdriver to dig into the wood and rotate. The popular head shape is a square because it holds the driver and doesn’t strip as easily as Phillips heads. Ever Hardware provides the custom made stainless steel deck screws and customizable packaging.

One feature of deck screws that makes them easy to install is the sharpness of their point. They often come to a very sharp, narrow point, to reduce the necessity of drilling pilot holes. Especially in a soft deck wood like cedar, these screws can be fastened without needing to pre-drill the hole, called self-tapping.
Secondly, screws designed for a deck will propel themselves into place because of their unique shank design. The thread of the screw is measured in degrees, so a shallower degree means more thread along the length. These threads spread out the force, so the screw takes less effort to put in, yet it is still difficult to pull out. Some types of deck screws are lubricated so they slide into the wood even more easily.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

Ever Hardware makes the world a better place