Plastic Screws Hex Shaft Internal External Threaded Standoffs Nylon

The custom plastic screws are produced by machining progress or lathe, machining is a part of the manufacture of many metal products, but it can also be used on materials such as wood, plastic, ceramic, and composites. A person who specializes in machining is called a machinist. A room, building, or company where machining is done is called a machine shop. Much of modern-day machining is carried out by computer numerical control (CNC), in which computers are used to control the movement and operation of the mills, lathes, and other cutting machines. Ever Hardware provides the custom made plastic screws and customizable packaging.

A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics, they are frequently used to raise a printed-circuit board above a surface. Insulating standoffs keep two parts from touching each other, thereby preventing electrical shorts. When used to fasten cable connectors (i.e. “D” connectors) together, they are called “jack screws”.
In contrast, a spacer is an unthreaded piece of tubing that lets the entire bolt pass through. Since they cannot be tightened, they are usually round.
The lathed tube can be cut off and chamfer OD and ID on both ends of a tube in one chucking. The stationary tube is gripped by two chucks—one before the rotating cutoff head, one after.
In one continuous operation, we cut, face and chamfer the trailing end of the cut segment and the leading end of the lathed tube being advanced.

Ever Hardware makes the world a better place