Truss Head Metric Machine Thread Screws Phillips Cross Stainless A2

The truss head refers to a screw head that is extra wide and has a slightly rounded surface, or top. In other words, the head or top on the screw protrudes just above the surface to be fastened but contains a wider surface area just under the head. Ever Hardware provides custom-made truss head machine screws and customizable packaging.

Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.

These screws can be used for applications like securing thin membranes, such as one-ply, through insulation. Wooden truss head screws are also commonly used to attach cabinets to steel studs; or to attach sliding shelf supports, since the low-profile head of the truss head screw does not interfere with guide operation.
Truss head screws are well suited for sheet metal and other material with large diameter holes due to their wide head. Additionally, because of their low-dome shaped head, these screws make tampering with or removing the head difficult.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

Ever Hardware makes the world a better place