Phillips Truss Head Machine Screws M2 M3 M4 M5 M6 M8 SS Full Thread

The phillips truss head machine screws can be used for applications like securing thin membranes, such as one-ply, through insulation. Wooden truss head screws are also commonly used to attach cabinets to steel studs; or to attach sliding shelf supports, since the low-profile head of the truss head screw does not interfere with guide operation. Truss head screws are well suited for sheet metal and other material with large diameter holes due to their wide head. Ever Hardware provides the custom-made phillips truss head machine screws and customizable packaging.

Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

Ever Hardware makes the world a better place