Stainless Steel Metric Machine Screws Socket Hexagon Cap Head Allen 304 Bot Flat Spring Double Washer Attached M2 M2.5 M3 M4 M5 M6 M8 Fasteners

The stainless steel metric machine screws are commonly used in machine parts, die fixturing, and clamping. The flat socket head enables driving where there is not sufficient space for wrenches or sockets and allows the screw head to sit flush with the surface. Ever Hardware provides custom-made stainless steel metric machine screws and customizable packaging.

The hex socket screw drive has a hexagonal recess and may be driven by a hex wrench, also known as an Allen wrench, Allen key, hex key, or inbus as well as by a hex screwdriver (also known as a hex driver) or bit. Tamper-resistant versions with a pin in the recess are available.

SEMS screw combines two separate parts into one pre-assembled, low-cost fastener. With washers under the head, SEMS screw is fast, permanent, and easily adaptable to many applications.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

Ever Hardware makes the world a better place