CSK Machine Screw Countersunk Head Stainless Steel Bolt Manufacturer

The CSK machine screw has a uniform diameter the entire length of the shaft as opposed to tapered screws that have a pointed tip. They are used to fasten machine components, appliances, and more. Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers. Ever Hardware provides the custom-made CSK machine screw and customizable packaging.

Phillips screwdrivers come in several standard sizes, ranging from tiny “jeweler’s” to those used for automobile frame assembly—or #00 to #4 respectively. This size number is usually stamped onto the shank (shaft) or handle for identification. Each bit size fits a range of screw sizes, more or less well. Each Phillips screwdriver size also has a related shank diameter. The driver has a 57° point and tapered, unsharp (rounded) flutes. By far the most commonly found size around the household, automobile, and office is the #2, —which fits computers, printers and photocopiers, light switches, carburetors, furniture, household appliances, door hinges, and so forth.

A countersink is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the surrounding material (by comparison, a counterbore makes a flat-bottomed hole that might be used with a socket-head capscrew). A countersink may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

Ever Hardware makes the world a better place