DIN967 Screws Cross Recessed Pan Washer Head Fasteners Machine Threaded

DIN967 screws combine the advantages of the pan head but have a washer built onto the head to increase head diameter and prevent overdriving in softwoods while providing a maximum bearing surface. These fasteners have Square-Phillips combo recess drive designed to offer the dependability of a square drive recess with the convenience and after-market serviceability of a Phillips drive. In addition, they have coarse thread design for superior holding power while reducing splitting or crumbling of the material, allowing the fastener to install rapidly with full thread engagement after just one revolution. The threaded surface is nearly perpendicular to the screw axis, providing great resistance to pullout. Ever Hardware provides custom-made fasteners and customizable packaging.

The Phillips screw drive was created by John P. Thompson, who after failing to interest manufacturers, sold his design to businessman Henry F. Phillips. Phillips is credited with forming a company (Phillips Screw Company), improving the design, and promoting the adoption of his product. Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.

Nylon patch is a pre-applied thread locking coating (typically Nylon), which is fused to internal or external threads of a fastener. The nylon patch is dry to the touch and ready for use right out of the box. Unlike reactive thread lockers, the nylon patch performs immediately upon assembly with no curing time required. When assembled with a mating part, the nylon patch is compressed.

Ever Hardware makes the world a better place