Dome head screws have a uniform diameter the entire length of the shaft as opposed to tapered screws that have a pointed tip. They are used to fasten machine components, appliances, and more. Ever Hardware provides custom-made fasteners and customizable packaging.
The Phillips screw drive was created by John P. Thompson, who after failing to interest manufacturers, sold his design to businessman Henry F. Phillips. Phillips is credited with forming a company (Phillips Screw Company), improving the design, and promoting the adoption of his product. Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away.
Ever Hardware makes the world a better place
Category | Dome Head Screws |
---|---|
Finish | Electro-Plating |
Thread type | Metric/Imperial/According to Request |
Material | Stainless Steel/Carbon Steel/Aluminum/Brass/Copper, etc. |
Brand | Ever Hardware |
Place of origin | China Mainland |
Size | Customized as required |
Amazing Product: Get It Now!
This is where your amazing product custom-made from!
How To Place An Order
What Client’s Say
Those look great! All the specs look perfect.
Perfect ! This is that I need.
Thank you very much.
The bolts are perfect and they’re fits good.
The nut fits perfect on our M2.5 screw part.
Height is also ok.
I tested the bolts this morning and they are perfect. Thank you so much.
We are professional on precision dome head screws and custom-made fasteners services!
This is where your amazing product design can go so your clients can feel all about the features and see how awesome it is!