Electrical appliances screws stainless steel shoulder screws slot cross
Electrical appliances screws are mainly used on electrical appliances. Most of the screws are custom made according to client’s request or drawing. Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required. Ever Hardware provides custom made electrical appliances screws and customizable packaging.
Shoulder bolt is screw with an unthreaded shoulder that is larger in diameter than the threads. The cylindrical shoulder that allows for the rotation of attached parts like pulleys, gears, moving parts of engines and mechanical assemblies, and rolling wheels.
The slot screw drive has a single slot in the fastener head and is driven by a “common blade” or flat-bladed screwdriver. It was the first type of screw drive to be developed, and for centuries it was the simplest and cheapest to make. The slotted screw is common in simple woodworking applications, but is not often seen in applications where a power tool would be used because a power driver tends to slip out of the head, potentially damaging the surrounding material.
Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.
Ever Hardware makes the world a better place
Contact To [email protected]
|Category||Electrical appliances screws|
|Finish||Purification or passivation|
|Thread||Machine threaded or as request|
|Material||Teflon/Brass/Stainless steel/carbon steel/Aluminum|
|Place of origin||China Mainland|
|Size option||M1.0 to M30 or #0 to 1-1/8″|
|Color||Natural or as request|