Gold Skateboard Nut Nyon Insert Nyloc Nut Manufacturer

Gold skateboard nut is nylon insert nut, used on the kingpin, or the countersunk head screws on the bottom of the skateboard. A nyloc nut also referred to as a nylon insert lock nut, polymer insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. Ever Hardware provides custom-made fasteners and customizable packaging.
The plastic insert is placed at the end of the gold skateboard nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 °F (121 °C).

Gold skateboard nut is finished by anodizing. Anodizing (also spelled anodizing, particularly in the UK, India, and Australia) is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
The process is called anodizing because the part to be treated forms the anode electrode of an electrical circuit. Anodizing increases resistance to corrosion and wear, and provides better adhesion for paint primers and glues than does bare metal. Anodic films can also be used for a number of cosmetic effects, either with thick porous coatings that can absorb dyes or with thin transparent coatings that add interference effects to reflected light. Anodizing is also used to prevent galling of threaded components and to make dielectric films for electrolytic capacitors.