Hexagon Spacer Two Side Different Size Steel Manufacturer

Hexagon spacer is an unthreaded piece of tubing that lets the entire bolt pass through. Since they cannot be tightened, they are usually round. A standoff is a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics, they are frequently used to raise a printed-circuit board above a surface. Insulating standoffs keep two parts from touching each other, thereby preventing electrical shorts. When used to fasten cable connectors (i.e. “D” connectors) together, they are called “jack screws”. The hexagon spacer is for special use. Ever Hardware provides custom-made fasteners and customizable packaging.

Zinc coatings prevent oxidation of the protected metal by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not cause a breakdown of the substrate’s surface integrity as it is formed. Indeed, the zinc oxide, if undisturbed, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The majority of hardware parts are zinc-plated, rather than cadmium-plated. Hot-dip galvanizing is the process of immersing iron or steel in a bath of molten zinc to produce a corrosion-resistant, multi-layered coating of zinc-iron alloy and zinc metal.  While the steel is immersed in the zinc, a metallurgical reaction occurs between the iron in the steel and the molten zinc.  This reaction is a diffusion process, so the coating forms perpendicular to all surfaces creating a uniform thickness throughout the part.