Lathed Tube Chamfered Tube Carbon Steel Anti Rust Zinc Plating

Lathed tube can be cut off and chamfer OD and ID on both ends of a tube in one chucking. The stationary tube is gripped by two chucks—one before the rotating cutoff head, one after. In one continuous operation, we cut, face and chamfer the trailing end of the cut segment and the leading end of the lathed tube being advanced. Ever Hardware provides custom-made fasteners and customizable packaging.
The hydraulic chucks and tube feeding system are programmable so you can produce precision parts with no collet or jaw changes. You can cut and chamfer a range of up to 4 inches in diameter with one tool setup.
For example, our lathed tube cutoff machine can changeover from a 2-inch diameter to 6 inches in less than a minute. Cut up to ten lengths from a tube, with all ends chamfered.
You can produce finished parts up to 9 inches diameter, from a one-half inch long up to 60 feet long.
The ID and OD chamfers can be different depths on both ends. No secondary operations required.

A lathe is a machine tool that rotates the workpiece on its axis to perform various operations such as cutting, sanding, knurling, drilling, or deformation, facing, turning, with tools that are applied to the workpiece to create an object with symmetry about an axis of rotation.
Lathes are used in woodturning, metalworking, metal spinning, thermal spraying, parts reclamation, and glass-working. Lathes can be used to shape pottery, the best-known design being the potter’s wheel. Most suitably equipped metalworking lathes can also be used to produce most solids of revolution, plane surfaces, and screw threads or helices. Ornamental lathes can produce three-dimensional solids of incredible complexity. The workpiece is usually held in place by either one or two centers, at least one of which can typically be moved horizontally to accommodate varying workpiece lengths. Other work-holding methods include clamping the work about the axis of rotation using a chuck or collet, or to a faceplate, using clamps or dogs.