M4 Sleeve Nut Flat Countersunk Head Barrel Nuts Stainless Fasteners

The M4 sleeve nut is the nut with a 4mm diameter internal thread. A sleeve nut is a nut used instead of a turnbuckle when high strength rods are required. It is used to couple rods and provides some degree of length adjustment. It is stronger than the corresponding connecting rod of the same materials. It is produced from hexagonal or round bars (usually stainless steel). It is given a plain finish. Ever Hardware provides the custom-made M4 sleeve nut and customizable packaging.

A turnbuckle, stretching screw or bottlescrew is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eye bolts, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both eye bolts to be screwed in or out simultaneously, without twisting the eye bolts or attached cables.
Turnbuckles are most commonly used in applications which require a great deal of tension; they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

Ever Hardware makes the world a better place

contact to [email protected]

Inquiry Now
Category M4 Sleeve Nut
Finish Purification or As request
Type Metric/Imperial Threaded or As request
Material Titanium/Bronze/Stainless Steel/Steel/Aluminum/Brass
Brand Ever Hardware
Place of origin China Mainland
Size option As request
Color Natural or as request

M4 Sleeve Nut Flat Countersunk Head Barrel Nuts Stainless Fasteners Riv Nut Precision Fasteners Metal Products Inserts Nutsert Rivnuts

Inquiry Now Skype