Metric Wood Screws Pozidriv Flat Head Tapping Threaded Golden Plating

The metric wood screws are used when connecting an application with only wood materials. These wood screws boast coarse threading, but that threading does not encompass the length of the screw. Normal wood screws thread as they enter the wood, where lag screws require a hole to be drilled first. Ever Hardware provides custom-made metric wood screws and customizable packaging.
The Pozidriv is an improved version of the Phillips screw drive. Pozidriv was jointly patented by the Phillips Screw Company and American Screw Company. The name is thought to be a portmanteau of the words “positive” and “drive.” Its advantage over Phillips drives is its decreased likelihood to cam out, which allows greater torque to be applied. In ANSI standards, it is referred to as “Type IA.” It is very similar to, and essentially compatible with, the Supadriv screw drive.
Pozidriv drive bits are often designated by the letters “PZ” plus a size code of 0, 1, 2, 3, 4 or 5 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.
Galvanization, or galvanisation, (or galvanizing as it is most commonly called in that industry), is the process of applying a protective zinc coating to steel or iron, to prevent metric wood screws from rusting. The most common method is hot-dip galvanizing, in which parts are submerged in a bath of molten zinc. Galvanizing protects in three ways:
It forms a coating of zinc which, when intact, prevents corrosive substances from reaching the underlying steel or iron.
The zinc serves as a sacrificial anode so that even if the coating is scratched, the exposed steel will still be protected by the remaining zinc.
The zinc protects its base metal by corroding before iron. For better results, the application of chromates over zinc is also seen as an industrial trend.

Ever Hardware makes the world a better place