Nickel Coating Screws UNC Threaded Pan Phillips Head Screws

Nickel coating screws are much pretty and more smoothly than the normal plating screws. The screws are commonly used in machine parts, die fixturing, and clamping. Ever Hardware provides custom-made fasteners and customizable packaging.

Unified Coarse (UNC), commonly referred to as National Coarse (NC) in retailing. The Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly used in the United States and Canada. It is the main standard for bolts, nuts, and a wide variety of other threaded fasteners used in these countries. It has the same 60° profile as the ISO metric screw thread, but the characteristic dimensions of each UTS thread (outer diameter and pitch) were chosen as an inch fraction rather than a millimeter value.

Nickel electroplating is a technique of electroplating a thin layer of nickel onto a metal object. The nickel layer can be decorative, provide corrosion resistance, wear resistance, or used to build up worn or undersized parts for salvage purposes.
Nickel electroplating is a process of depositing nickel on a metal part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. To clean and protect the part during the plating process a combination of heat treating, cleaning, masking, pickling, and etching may be used. Once the piece has been prepared it is immersed into an electrolyte solution and is used as the cathode. The nickel anode is dissolved into the electrolyte in the form of nickel ions. The ions travel through the solution and deposit on the cathode.