Plastic Spacers And Standoffs Nylon Fixed Clips Snap-In Pillars Colors Kit

The plastic spacers and standoffs are a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics, they are frequently used to raise a printed-circuit board above a surface. Insulating standoffs keep two parts from touching each other, thereby preventing electrical shorts. When used to fasten cable connectors (i.e. “D” connectors) together, they are called “jack screws”. Ever Hardware provides custom-made plastic spacers and standoffs and customizable packaging.

Nylon is a generic designation for a family of synthetic polymers, more specifically aliphatic or semi-aromatic polyamides. They can be melt-processed into fibers, films, or shapes. The first example of nylon (nylon 6,6) was produced on February 28, 1935, by Wallace Carothers at DuPont’s research facility at the DuPont Experimental Station. Nylon polymers have found significant commercial applications in fibers (apparel, flooring, and rubber reinforcement), in shapes (molded parts for cars, electrical equipment, etc.), and in films (mostly for food packaging). Use these Nylon Spacers with bolts and screws to maintain space between the head and the surface. These spacers are constructed from durable nylon material. Nylon helps with vibration and corrosion resistance. After the initial commercialization of nylon as a fiber, applications in the form of shapes and films were also developed. The main market for nylon shapes now is in auto components, but there are many others.
Injection molding BrE or Injection molding AmE is a manufacturing process for producing parts by injecting material into a mold. Injection molding can be performed with a host of materials mainly including metals, (for which the process is called die-casting), glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated barrel, mixed, and forced into a mold cavity, where it cools and hardens to the configuration of the cavity.

Ever Hardware makes the world a better place