Screw Pan Slot Cross Pozi Stainless Steel Plain Imperial Threaded

The screw pan head commonly used in machine parts die fixturing and clamping. The cross recessed pan head enables driving where there is not sufficient space for wrenches or sockets and allows the screw head to sit flush on the surface. Ever Hardware provides the custom-made screw pan head and customizable packaging.

The slot screw drive has a single slot in the fastener head and is driven by a “common blade” or flat-bladed screwdriver. It was the first type of screw drive to be developed, and for centuries it was the simplest and cheapest to make. The slotted screw is common in simple woodworking applications but is not often seen in applications where a power tool would be used because a power driver tends to slip out of the head, potentially damaging the surrounding material. The tool used to drive a slot is called a common blade, standard, flat-blade, slot-head, flat-tip, or “flat-head/flathead” screwdriver.

Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure.

Ever Hardware makes the world a better place