Shoulder Panel Screws Stainless Steel Phillips CSK Head Precision Bolts

Shoulder panel screws are one of the custom made screw. The screw with an unthreaded shoulder that is larger in diameter than the threads. The cylindrical shoulder that allows for the rotation of attached parts like pulleys, gears, moving parts of engines and mechanical assemblies, and rolling wheels. The shoulder bolt also used to attach stripper plates. Ever Hardware provides custom-made fasteners and customizable packaging.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away.

A countersink is a conical hole cut into a manufactured object, or the cutter used to cut such a hole. A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or below the surface of the surrounding material (by comparison, a counterbore makes a flat-bottomed hole that might be used with a socket-head capscrew). A countersink may also be used to remove the burr left from a drilling or tapping operation thereby improving the finish of the product and removing any hazardous sharp edges.

Ever Hardware makes the world a better place