Stainless Captive Screw Panel Hardware Electrical Captive Panel Screw

Stainless captive screw is an engineered class of fastener designed for a permanent hold (captivation) within a target assembly or housing, including upon servicing. They provide a secure joining and avoid fastener loss or damage that might be caused by a loose part.
A Captive fastener is often made with thread locking, press-fitting, or broaching to accomplish an anchor-hold within a larger assembly housing. However, a captive fastener may also be melded with the material into which it is joined, either through cold forming or welding. Ever Hardware provides custom-made fasteners and customizable packaging.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure.

Ever Hardware makes the world a better place