Stainless Small Machine Screws Pan Phillips Head Metric Electronics Screw

Stainless small machine screws are mainly used on electrical. The machine screw has a uniform diameter the entire length of the shaft as opposed to tapered screws that have a pointed tip. They are used to fasten machine components, appliances, and more. Ever Hardware provides custom-made fasteners and customizable packaging.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

Passivation, in physical chemistry and engineering, refers to a material becoming “passive,” that is, less affected or corroded by the environment of future use. Passivation involves the creation of an outer layer of shield material that is applied as a micro coating, created by chemical reaction with the base material or allowed to build from spontaneous oxidation in the air. As a technique, passivation is the use of a light coat of protective material, such as metal oxide, to create a shell against corrosion.

Phillips is credited with forming a company (Phillips Screw Company), improving the design, and promoting the adoption of his product. Phillips drive bits are often designated by the letters “PH”, plus a size code 0000, 000, 00, 0, 1, 2, 3, or 4 (by order of increasing size); the numerical bit size codes do not necessarily correspond to nominal screw size numbers.

Ever Hardware makes the world a better place