The stainless steel torx head screws combine two separate parts into one pre-assembled, low-cost fastener. With washers under the head, SEMS screw is fast, permanent, and easily adaptable to many applications. Ever Hardware provides custom-made stainless steel torx head screws and customizable packaging.
Torx screws are commonly found on automobiles, motorcycles, bicycle brake systems (disc brakes), hard disk drives, computer systems, and consumer electronics. Initially, they were sometimes used in applications requiring tamper resistance, since the drive systems and screwdrivers were not widely available; as drivers became more common, tamper-resistant variants, as described below, were developed. Torx screws are also becoming increasingly popular in construction industries.
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID).
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.
Ever Hardware makes the world a better place
| Category | Stainless Steel Torx Head Screws |
|---|---|
| Finish | Electro-Plating |
| Thread type | Metric/Imperial/According to Request |
| Material | Stainless Steel/Carbon Steel/Aluminum/Brass/Copper, etc. |
| Brand | Ever Hardware |
| Place of origin | China Mainland |
| Size | Customized as required |
Amazing Product: Get It Now!
This is where your amazing product custom-made from!
How To Place An Order
What Client’s Say
Those look great! All the specs look perfect.
Perfect ! This is that I need.
Thank you very much.
The bolts are perfect and they’re fits good.
The nut fits perfect on our M2.5 screw part.
Height is also ok.
I tested the bolts this morning and they are perfect. Thank you so much.
We are professional on precision stainless steel torx head screws and custom-made fasteners services!
This is where your amazing product design can go so your clients can feel all about the features and see how awesome it is!
