Stainless U Bolts RAM Mount SS Pipe Clamp U Screws A2-70 Straps

The stainless u bolts are a bolt in the shape of the letter U with screw threads on both ends. U clamp has primarily been used to support pipework, pipes through which fluids and gasses pass. As such, U-bolts were measured using pipe-work engineering speak. A U-bolt would be described by the size of the pipe it was supporting. U-bolts are also used to hold ropes together. Ever Hardware provides custom-made stainless u bolts and customizable packaging.

For example, a 40 Nominal Bore U-bolt would be asked for by pipework engineers, and only they would know what that meant. In reality, the 40 nominal bore part bears little resemblance to the size and dimensions of the U-bolt.
The nominal bore of a pipe is actually a measurement of the inside diameter of the pipe. Engineers are interested in this because they design a pipe by the amount of fluid/gas it can transport.
As U-bolts are now being used by a much wider audience to clamp any kind of tubing/round bar, then a more convenient measurement system needs to be used.
Four elements uniquely define any U-bolt:
Material type (for example bright zinc-plated mild steel)
Thread dimensions (for example M12 * 50 mm)
Inside diameter (for example 50 mm – the distance between the legs)
Inside height (for example 120 mm)
Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air-circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

Ever Hardware makes the world a better place