Standoff Screws Motherboard Circuit Spacer PCB Board Nut Round

The standoff screws are a threaded separator of defined length used to raise one assembly above another. They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics, they are frequently used to raise a printed-circuit board above a surface. Insulating standoffs keep two parts from touching each other, thereby preventing electrical shorts. When used to fasten cable connectors (i.e. “D” connectors) together, they are called “jack screws”.
In contrast, a spacer is an unthreaded piece of tubing that lets the entire bolt pass through. Since they cannot be tightened, they are usually round. Ever Hardware provides the custom standoff screws and customizable packaging.

Galvanization, or galvanisation, (or galvanizing as it is most commonly called in that industry), is the process of applying a protective zinc coating to steel or iron, to prevent standoff screws from rusting. The most common method is hot-dip galvanizing, in which parts are submerged in a bath of molten zinc. Galvanizing protects in three ways:
It forms a coating of zinc which, when intact, prevents corrosive substances from reaching the underlying steel or iron.
The zinc serves as a sacrificial anode so that even if the coating is scratched, the exposed steel will still be protected by the remaining zinc.
The zinc protects its base metal by corroding before iron. For better results, the application of chromates over zinc is also seen as an industrial trend.

Ever Hardware makes the world a better place