Tee Nut Inserts For Wood Screw Inserts Zinc Alloy Hex Drive Head
The tee nut inserts for wood used to fasten a wood, particle or composite materials workpiece, leaving a flush surface. It has a long, thin body and a flange at one end, resembling a T in profile. The nut digs into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention. Ever Hardware provides the custom-made tee nut inserts for wood and customizable packaging.
The hex socket screw drive has a hexagonal recess and may be driven by a hex wrench, also known as an Allen wrench, Allen key, hex key or inbus as well as by a hex screwdriver (also known as a hex driver) or bit. Tamper-resistant versions with a pin in the recess are available.
The German company Bauer & Schaurte patented the hex socket 1936 in Germany, and offered products based on it to the market. The abbreviation “Inbus” is derived from “Innensechskant Bauer & Schurte”, analogous to the US use of “Allen key”.
Galvanization, or galvanisation, (or galvanizing as it is most commonly called in that industry), is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanizing, in which parts are submerged in a bath of molten zinc. Galvanizing protects in three ways:
It forms a coating of zinc which, when intact, prevents corrosive substances from reaching the underlying steel or iron.
The zinc serves as a sacrificial anode so that even if the coating is scratched, the exposed steel will still be protected by the remaining zinc.
The zinc protects its base metal by corroding before iron. For better results, application of chromates over zinc is also seen as an industrial trend.
Ever Hardware makes the world a better place
contact to [email protected]Mail Us
|Category||Tee Nut Inserts for Wood|
|Finish||Galvanization or As request|
|Type||Metric/Imperial Threaded or As request|
|Place of origin||China Mainland|
|Size option||As request|
|Color||Yellow or as request|