Blind Nuts For Wood Four Pronged Captive Threaded Furniture Inserts

The blind nuts for wood are also known as T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.
It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden workpiece as the bolt is tightened from the opposite side of the piece, providing better retention. Ever Hardware provides custom-made blind nuts for wood and customizable packaging.

Zinc coatings prevent oxidation of the protected metal by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not cause a breakdown of the substrate’s surface integrity as it is formed. Indeed, the zinc oxide, if undisturbed, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The majority of hardware parts are zinc-plated, rather than cadmium-plated.
The primary purpose of zinc plating is to protect metals from the effects of corrosion or rust. Zinc Plated coatings are “sacrificial” coatings – meaning the coating sacrifices itself in order to protect the substrate beneath, as the coating oxidizes the corrosion itself continues to provide a level of protection to the substrate.
Zinc plating comes in different colors – but each of the colors can result from the type of plating formulation used – meaning that they do not necessarily have the same resulting corrosion resistance properties as each other. Further, zinc plating types also vary in their ability to protect from both “red” (iron-related) and “white” (alloy related) corrosion types.

Ever Hardware makes the world a better place