Nut And Washer Four Pronged Nuts Cup Washers Custom Made Fastener

The nut and washer are custom-made according to the client’s request or drawing. A fastener is a hardware device that mechanically joins or affixes two or more objects together. Ever Hardware provides the custom-made nut and washer and customizable packaging.

A T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut) is a type of nut used to fasten a wood, particle, or composite materials workpiece, leaving a flush surface.
It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden workpiece as the bolt is tightened from the opposite side of the piece, providing better retention.
In 1969, the first four-prong T-nut with the eight-sided base was patented. Unlike the standard round base T-nuts, the eight-sided T-nuts can be fed efficiently and reliably via machine. The eight-sided T-nut base has become the standard configuration for T-nuts inserted by the machine.
Often used in furniture to provide an internally threaded surface for fasteners, tee nuts are inserted into materials like wood, composites, and particleboard. They feature a head style that digs into the surface to ensure retention and leave the nut flush with the surface.

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (Belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice larger than their inner diameter (ID).

Ever Hardware makes the world a better place