Bed Frame Parts Bed Fittings Brackets White Galvanizing Bed Metal Corner

Bed frame parts are mostly made of metal sheets and stamping or bending finished. Stamping (also known as pressing) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stamping press, blanking, embossing, bending, flanging, and coining. This could be a single stage operation where every stroke of the press produces the desired form on the sheet metal part or could occur through a series of stages. The process is usually carried out on sheet metal, but can also be used on other materials, such as polystyrene. Stamping is usually done on a cold metal sheet. See Forging for hot metal forming operations. Bending is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in ductile materials, most commonly sheet metal. Ever Hardware provides custom-made fasteners and customizable packaging.

Galvanization, or galvanisation, (or galvanizing as it is most commonly called in that industry), is the process of applying a protective zinc coating to steel or iron, to prevent bed frame parts rusting. The most common method is hot-dip galvanizing, in which parts are submerged in a bath of molten zinc. Galvanizing protects in three ways:
It forms a coating of zinc which, when intact, prevents corrosive substances from reaching the underlying steel or iron.
The zinc serves as a sacrificial anode so that even if the coating is scratched, the exposed steel will still be protected by the remaining zinc.
The zinc protects its base metal by corroding before iron. For better results, the application of chromates over zinc is also seen as an industrial trend.

Ever Hardware makes the world a better place