Special T nut threaded insert for metal large flange square t nut

Special T nut is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface. It has a long, thin body and a flange at one end, resembling a T in profile. The flanges of T-nuts often have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention. Ever Hardware provides custom made special t nut and customizable packaging.

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does. However, it is not fully stain-proof in low-oxygen, high salinity, or poor air circulation environments. There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.
Stainless steel differs from carbon steel by the amount of chromium present. Unprotected carbon steel rusts readily when exposed to air and moisture. This iron oxide film (the rust) is active and accelerates corrosion by forming more iron oxide; and, because of the greater volume of the iron oxide, this tends to flake and fall away. Stainless steels contain sufficient chromium to form a passive film of chromium oxide, which prevents further surface corrosion by blocking oxygen diffusion to the steel surface and blocks corrosion from spreading into the metal’s internal structure. Passivation occurs only if the proportion of chromium is high enough and oxygen is present.

Ever Hardware makes the world a better place

Contact To [email protected]

Category Special T nut
Finish Purification or Passivation
Thread Machine threaded or as request
Material Teflon/Brass/Stainless steel/carbon steel/Aluminum
Brand Ever Hardware
Place of origin China Mainland
Size option M1.0 to M30 or #0 to 1-1/8″
Color Natural or as request

Special T nut threaded insert for metal large flange square t nut