Serrated lock washer out toothed fastener brass lock washers hardware
Serrated lock washer has the serrations around the outer edge, which provides better holding power, because of the greater circumference. It is a washer with serrations that extend radially inward or outward to bite into the bearing surface. This type of washer is especially effective as a lock washer when used with a soft substrate, such as aluminium or plastic, and can resist rotation more than a plain washer on hard surfaces, as the tension between washer and the surface is applied over a much smaller area (the teeth).
Tooth lock washers are also used for ground bonding where a metal lug or object must be electrically bonded to a surface. The teeth of the washer cut through surface oxides, paints or other finishes and provide a gas-tight conductive path. In these applications the washer is not placed under the head of the screw (or under the nut), it is placed between the surfaces to be bonded. In such applications, the tooth washer does not provide any anti-rotation locking features. Ever Hardware provides serrated lock washer and customizable packaging.
Brass is a metal alloy made of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure.
By comparison, bronze is principally an alloy of copper and tin. However, bronze and brass may also include small proportions of a range of other elements including arsenic, phosphorus, aluminium, manganese, and silicon.
Ever Hardware makes the world a better place
Contact To [email protected]
|Category||Serrated lock washer|
|Finish||Stamping & Heat treating & Electroplating|
|Material||Teflon/Brass/Stainless steel/carbon steel/Aluminum|
|Place of origin||China Mainland|
|Size option||As request|
|Color||White or as request|